The detector is used to indicate flooding (in basements, bathrooms, etc.). This information is transmitted to the alarm system bus.
JA-110F Bus flood detector
When water covers the electrodes the detector sends an activation signal, a deactivation signal is sent if the water leaves the electrodes.
It has no tamper facilty and occupies one address in the system.
|Power||12 V bus (9 … 15 V)|
|Current consumption in standby||5 mA|
|Current consumption for choice of cable||5 mA|
|Detector responds||to flooding|
|Dimensions||53 x 20 x 10 mm|
|Environment||EN 50131-1. general indoor|
|Operating temperature range||-10 to 40 ° C|
|Complies with||EN 50130-4, EN 55022|