Bus expander is used for powering and connecting up to 16 detectors with contact outputs. It is possible to install the module straight into the JA-106K control panel.
|Power||12 V (9 … 15 V)|
|Current consumption (all outputs turned on)||25 mA
Caution: the consumptions of the detectors connected to the U and GND terminals have to be added to the system power backup calculation.
|Maximum acceptable load of one output from U and GND||100mA|
|Maximum acceptable load of all outputs from U GND||4 x 100mA|
|Dimensions||102 x 66 x 20 mm|
|according to||EN 50131-1, EN 50131-3|
|Operational environment according to||EN 50131-1 II. Indoor general|
|Operating temperature range||-10 to 40 °C|
|Also complies with||EN 50130-4, EN 55022|