It serves for the detection of human movement in building interiors and for the detection of breaking glass windows. This detector combines two sensors (PIR motion & acoustic glass break) in one housing.
JA-120PB Bus combined PIR motion and glass-break detector
The detector is enrolled to two consecutive positions in the system.
The detector uses a PIR sensor for human movement detection. Breaking glass is detected by a GBS sensor, which analyses air pressure changes and sounds to detect the breaking of a glass window.
|Power||from the control panel bus 12 V (9 … 15 V)|
|Current consumption in standby mode||5 mA|
|Current consumption for cable choise||10 mA|
|Recommended installation height||2.5 m above the floor|
|Detection angle / coverage PIR||110 degrees /12 m ( standard lens)|
|Detection distance||GBS 9m (window glass size min. 0.6x 0.6 m)|
|Dimensions||60 x 95 x 55 mm|
|according to||EN 50131-1, EN 50131-2-2, CLC/TS 50131-2-7-1|
|Operational environment||EN 50131-1 II. Indoor general|
|Operational temperature range||-10 to 40 °C|
|Also complies with||EN 50130-4, EN 55022|