The detector is used for human motion detection in the interior of a building. Thanks to the combination of motion and microwave detection, the detector is highly resistant to false alarms.
JA-180W Wireless PIR and MW combined detector
When motion is sensed by the PIR detector, the MW detector is activated to confirm the triggering of the PIR. Only after receiving a confirmed alarm signal from the MW unit , the detector sends an alarm report to the control panel.
The detection characteristic may be optimised by using alternative lenses JS-7904 LONG HALLWAY, JS 7906 PET or JS-7901 CURTAIN.
It is addressable and occupies one position in the alarm.
|Power||Lithium battery type LS (T) 14500 (3.6 AA / 2.4 Ah)
Please note: Battery is not included
|Typical battery life||about 2 years (switch in position # 3 NORM)|
|Communication band||868.1 MHz, Jablotron protocol|
|Communication range||300m (open area)|
|Recommended installation height||2.5 m above floor|
|Detection angle / PIR detection range||120 ° / 12 m (standard lens)|
|Detection range / MW operating frequency||0.5 to 20m / 9.35 GHz|
|Environment according to EN 50131-1||II. general indoor|
|Operating temperature range||-10 to 40 ° C|
|Classification||grade 2 according to EN 50131-1, EN 50131-2-4, EN 50131-5-3|
|Dimensions, weight||110 x 60 x 55 mm, 140 g|
|Complies with||ETSI EN 300220, ETSI EN 300440-1, EN 50130-4, EN 55022, 60950-1|
|Can be operated to||ERC REC 70-03|