In a building, up to 16 thermostats can be installed that can control up to 16 independent circuits. The product is a component of the JABLOTRON 100 system, is addressable and occupies one position in the system.
JA-110TP Bus indoor thermostat
- Full integration in My JABLOTRON = information of the current status and remote control of the thermostat
- Automatic switch-over to the economy temperature on setting the premises
- Weekly schedule mode
- Possibility to enter the manual temperature setting mode
- Possibility to switch off if only a minimum temperature should be maintained in the building
- Heating suppression if a window is open
- Report in the case of overheating or freezing
- Easy control by dial
- Temperature history graph
- Tamper sensor
Technical specifications
| Power | via the control panel bus 12 V ( 9 – 15 V) |
|---|---|
| Backup (idle) mode consumption | 1 mA |
| Current consumption for cable selection | 1 mA |
| Recommended installation height | 1.5 m above floor level |
| Dimensions | 66 x 90 x 22 mm |
| Operating temperature range | -10 to 70 °C |
| Measurement accuracy in the range of operating temperatures | 0.1 °C |
| It also meets the requirements of | EN 50130-4, EN 55022 |
