The product is a bus system device for the JABLOTRON 100 . A bus module used to connect a wide range of magnetic switches to detect when doors and windows are opened. It has two independent inputs with the option of fully setting their properties.
JA-112M Bus module for magnetic detectors – 2 inputs
Up to 100 m of wiring can be connected to each input. Inputs can be connected without balancing, they can be balanced singly or doubly and can be connected to a roller blind switch function. It also allows the inverting of the input or the minimum activation time to trigger the alarm (0.1 s to 300 s) to be set.
The detector communicates with the control panel bus and is powered by it. The detector is addressable and occupies two positions in the security system.
|Power supply||via the control panel bus 12 V (9 …15 V)|
|Backup (idle) mode current consumption||5 mA|
|Current consumption for cable selection||10 mA|
|Maximum cable length from the input to the detector||100 m|
|Dimensions||110 x 44 x 26 mm|
|Classification||EN 50131-1 ed. 2 A1 A2, EN 50131-3|
|Environment according to||EN 50131-1 II. indoor, general|
|Operation temperature range||-10 °C to 40 °C|
|It also meets the requirements of||EN 50130-4 ed. 2 A2, EN 55032, EN 50581|