Bus power output module PG. The product is a system device for the JABLOTRON 100 . It provides a switching contact for the output power relay. It can be used, for example, to control lighting, fans, etc.
JB-110N Bus PG power output module
The module communicates via a bus and is powered by the control panel bus. It can be installed in a JA-19xPL installation box or a control panel box.
Technical specifications:
| Power supply | via the control panel bus 12 V (9 …15 V) |
|---|---|
| Current consumption during backup (open/closed relay) | 5 mA/45 mA |
| Current consumption for cable selection | 45 mA |
| Loading capacity of the relay contacts: | |
| Max. switched voltage | 250 V AC/24V DC |
| Resistive load (cosฯ=1) | max. 16 A |
| Inductive, capacitive load (cosฯ=0.4) | max. 8 A |
| Minimum switched DC power | 0.5 W |
| Protection | class II |
| Dimensions | 70 x 38 x 20 mm |
| Classification | level 2 in acc. with EN 50131-1, EN 50131-3 only when module is located in a JA-194PL or JA-195PL box using the JA-111H TRB module |
| Environment according to | EN 50131-1 II. indoor, general |
| Operation temperature range | 10 ยฐC to 40 ยฐC |
| It also meets the requirements of | EN 50130-4 ed. 2 A1, EN 55032, EN 62368-1, EN 50581 |
