The wireless multifunctional relay is a component of the JABLOTRON 100 system, but it can be equally installed as a stand-alone device without a link to a control panel.
AC-160-DIN Wireless multifunctional relay for DIN-rail installation
It provides a switching contact relay with galvanic and safety isolation for switching 230 V/16 A power loads. The relay can respond to the status of control panel PG outputs or to the activation of devices of the JA-15x series with unidirectional communication, enrolled directly to the relay. The response can be selected from five modes – the default NATURAL function (extended copy), IMPULSE, STATUS CHANGE, SWITCH OFF and BLOCK. The relay also has a button for a direct manual status change. It allows you to update the firmware via a USB port. It is designed to be mounted on a DIN rail. It occupies one position in the system.
Technical specifications
| Power supply | ~ 230 V / 50 Hz, protective class II. |
|---|---|
| Internal power consumption | 0.4 W / max. 1.5 W |
| Loading capacity of the power relay contacts: | |
| (galvanically isolated from the control terminals) | protection class II: |
| Max. switched voltage | 250 V AC / 24 V DC |
| Resistance load (cosφ=1) | max. 16 A |
| Inductive, capacitive loads (cosφ=0.4) | max. 8 A |
| Halogen lighting | max. 1000 W |
| Minimum switched DC power | 0.5 W |
| Wire cross section | max. 2 x 1.5 mm2; max. 1 x 2.5 mm2 |
| Dimensions | 18 x 90 x 65 mm, 1 DIN module |
| Environment according to | II. indoor, general, in accordance with EN 50131-1 |
| Operating temperature range | -10 to 40 °C |
| Ingress protection class | IP20, IP40 for the front panel (EN 60529) |
| In conformity with | ETSI EN 300 220-1, EN 60950-1, EN 60947-6-1, EN 50581. |
Reviews
There are no reviews yet.