The product is a wireless system device for the JABLOTRON 100 . It is designed to detect human body motion inside buildings. Its guaranteed detection coverage is 90 °/12 m. The detector meets the highest quality and design requirements, making it suitable even for luxurious interiors.
JA-152P Wireless PIR motion detector
Besides standard positioning in a corner of a room it can be installed on a wall surface using a JA-196PL-S bracket where the detector is partly recessed and elegantly blends with the wall. For special applications such as e.g. ceiling mounting or an inclined detection angle the JA-191PL articulated holder can be used.
- The detector has impulse activation.
- The detector can be used to control programmable PG outputs.
- The resistance to false alarms is adjustable at two levels
- The detector provides standard resistance to white light at the level prescribed by the standard (up to 6000 lux).
- The detector is addressable and it occupies one position in the system
- Technical specifications
| Compatible with | F-Link 2.0.0 and higher |
|---|---|
| Power | 1 Lithium battery type CR123A (3 V/1500 mAh) Please note: Battery not included |
| Typical battery lifetime | 4 years (the longest in smartwatch mode, at 20°C) |
| Low battery voltage | < 2.4 V |
| Current consumption in standby mode | 30 μA |
| Maximum current consumption | 100 mA |
| Communication band | 868.1 MHz, JABLOTRON protocol |
| Communication range | approx. 300 m (open area) |
| Recommended installation height | 2.2 – 2.5 m above the floor |
| Detection angle/detection coverage | 90°/12 m |
| Dimensions | 62 x 110 x 40 mm |
| Weight (without battery) | 90 g |
| Classification | Security grade 2/Environmental class II (according to EN 50131-1) |
| Operational environment | Indoor general |
| Operational temperature range | -10 °C to 40 °C |
| Average operational humidity | 75 % RH, non-condensing |
| Certification body | Trezor Test s.r.o. (no. 3025) |
| Complies with | EN 50131-1 ed. 2 A1 A2, EN 50131-2-2, EN 50131-5-3 A1, EN 50131-6 ed. 2 A1, ETSI EN 300 220-1,-2, EN 50130-4 ed. 2 A1, EN 55032, EN 62368-1, EN 50581 |
| Can be operated according to ERC REC 70-30 |
Reviews
There are no reviews yet.