The product is a wireless system device for the JABLOTRON 100 . It is designed to detect human body motion inside buildings. Compared to standard motion detectors from the JABLOTRON 100 series, this detector is designed for ceiling installation.
JA-155P Wireless ceiling PIR motion detector
It is installed on the ceiling and its guaranteed detection coverage is 360° with a capture radius of up to 5.5 m at a mounting height of 3.5 m.
The resistance to false alarms is adjustable at two levels
The detector has a pulse response and occupies one position in the system.
The mounting spacer (PLV-P-ST) is a certified accessory for ceiling detectors; these can be used with wireless detectors to separate the antenna from the mounting surface and thus to potentially improve the range.
Technical specifications
| Power | 2x lithium batteries, type CR123A (3 V/1500 mAh) Warning: batteries are not included.
| ||||||
|---|---|---|---|---|---|---|---|
| Low battery voltage | < 2.4 V | ||||||
| Communication band | 868.1 MHz, JABLOTRON protocol | ||||||
| RF range | up to 300 m (open area) | ||||||
| Recommended installation height | 2.5 – 3.5 m above the ground level | ||||||
| Detection coverage | 360°/11 m (installation height – 3.5 m) | ||||||
| Dimmensions | Ø125×40 mm | ||||||
| Weight (without batteries) | 124 g | ||||||
| Classification | security grade 2/II. Indoor general (according to EN 50131-1) | ||||||
| Operational environment | indoor general | ||||||
| Operational temperature range | -10 °C to 40 °C | ||||||
| Average operational humidity | 75 % RH, non-condensing | ||||||
| Certification body | Trezor Test s.r.o. (no. 3025) | ||||||
| Complies with | EN 50131-1 ed. 2 A1 A2, EN 50131-2-2, EN 50131-5-3 A1, ETSI EN 300 220-1,-2, EN 50130-4 ed. 2 A1, EN 55032, EN 62368-1, EN 50581 | ||||||
| Can be operated according to | ERC REC 70-03 |
Reviews
There are no reviews yet.