The detector is used for human motion detection in the interior of a building. Thanks to the combination of motion and microwave detection, the detector is highly resistant to false alarms.
JA-180W Wireless PIR and MW combined detector
When motion is sensed by the PIR detector, the MW detector is activated to confirm the triggering of the PIR. Only after receiving a confirmed alarm signal from the MW unit , the detector sends an alarm report to the control panel.
The detection characteristic may be optimised by using alternative lenses JS-7904 LONG HALLWAY, JS 7906 PET or JS-7901 CURTAIN.
It is addressable and occupies one position in the alarm.
Technical specifications
| Power | Lithium battery type LS (T) 14500 (3.6 AA / 2.4 Ah) Please note: Battery is not included |
|---|---|
| Typical battery life | about 2 years (switch in position # 3 NORM) |
| Communication band | 868.1 MHz, Jablotron protocol |
| Communication range | 300m (open area) |
| Recommended installation height | 2.5 m above floor |
| Detection angle / PIR detection range | 120 ° / 12 m (standard lens) |
| Detection range / MW operating frequency | 0.5 to 20m / 9.35 GHz |
| Environment according to EN 50131-1 | II. general indoor |
| Operating temperature range | -10 to 40 ° C |
| Classification | grade 2 according to EN 50131-1, EN 50131-2-4, EN 50131-5-3 |
| Dimensions, weight | 110 x 60 x 55 mm, 140 g |
| Complies with | ETSI EN 300220, ETSI EN 300440-1, EN 50130-4, EN 55022, 60950-1 |
| Can be operated to | ERC REC 70-03 |
Reviews
There are no reviews yet.