Circuit Breaker 63A 1PH DC

First, this fuse holder can support fuses with sizes that can reach up to 10*38mm.

Additionally, the fuse holder is able to work under heat that the rated current can cause, it can tolerate around 10 KA of short impacting current.

Next, you can use this fuse base as a fuse disconnecting switch by multiphase combination.

Moreover, this base fuse can provide the function of cutting power, and that will protect your devices from any possible power surges.

furthermore, this base fuse has a locking mechanism when it is disconnected and that will protect you from wrong operations.

Likewise, it has an indicator that will show to the user when the fuse line breaks.

FEATURES OF Circuit Breaker 63A 1PH DC:

• used in lighting distribution system or motor distribution system for protecting overload and short-circuit in the system.
• It has high breaking capacity and can trip quickly.
• The products are also used for infrequent on-and-off switching of electric equipment and lighting circuit under the normal condition.

  It is suitable to power system of 50or 60 frequency ,Ue 400V and below, Ui 63A and below.

  It is mainly applied at office building, residence, for lighting , power distribution and overload and short circuit protection of equipment. Normally, it also can be used as the not frequent transfer of power system. It conforms to the standards IEC60898and GB10963.1.

  Key Parameters:

  •  CE/CB/ISO9001/CCC certificates;
  • Rated voltage:230/400VAC;
  • frequency50/60Hz;
  • Rated current:6,10,16,20,25,32,40,50,63A;
  • 1/2/3/4poles optional;
  • Mechanical life:20,000times;
  • Flame-redardant:PA66 nylon material;
  • Protection degree:IP20;
  • With over load/short circuit protection;
  • Standard:IEC60898;
  • Enduring temperature:30°C
  • Breaking Capacity:4.5KA;
  • Lighting/Motor protection optional