JA-180W Wireless PIR and MW combined detector

The detector is used for human motion detection in the interior of a building. Thanks to the combination of motion and microwave detection, the detector is highly resistant to false alarms.

JA-180W Wireless PIR and MW combined detector

When motion is sensed by the PIR detector, the MW detector is activated to confirm the triggering of the PIR. Only after receiving a confirmed alarm signal from the MW unit , the detector sends an alarm report to the control panel.

The detection characteristic may be optimised by using alternative lenses JS-7904 LONG HALLWAY, JS 7906 PET or JS-7901 CURTAIN.

It is addressable and occupies one position in the alarm.

Technical specifications

Power	Lithium battery type LS (T) 14500 (3.6 AA / 2.4 Ah) Please note: Battery is not included
Typical battery life	about 2 years (switch in position # 3 NORM)
Communication band	868.1 MHz, Jablotron protocol
Communication range	300m (open area)
Recommended installation height	2.5 m above floor
Detection angle / PIR detection range	120 ° / 12 m (standard lens)
Detection range / MW operating frequency	0.5 to 20m / 9.35 GHz
Environment according to EN 50131-1	II. general indoor
Operating temperature range	-10 to 40 ° C
Classification	grade 2 according to EN 50131-1, EN 50131-2-4, EN 50131-5-3
Dimensions, weight	110 x 60 x 55 mm, 140 g
Complies with	ETSI EN 300220, ETSI EN 300440-1, EN 50130-4, EN 55022, 60950-1
Can be operated to	ERC REC 70-03