Roll over image to zoom in
Click to open expanded view
Standalone Access Control Terminal
$ 75
SKU: DS-K1T105
DS-K1T105 is a series of standalone access
control terminal, designed with a 2.8-inch LCD
display screen. It supports two network
communication methods (TCP/IP, and Wi-Fi), and
supports offline operation. It also supports HD
camera (2 MP optional
System Parameters | ||
---|---|---|
Camera: | 2MP (Optional) | |
Operation System: | Linux | |
Card Reading Frequency: | EM Card (DS-K1T105E/E-C): 125KHz;
Mifare Card (DS-K1T105M/M-C): 13.56MHz |
|
Built-in Micro SD Card: | Max.32G | |
Storage: | 256M Storage | |
Card Reading Mode: | Supports EM card reading (DS K1T105E/E-C)
Supports Mifare card reading, including card No. reading & writing function (DS-K1T105M/M-C) |
|
Valid Card/ Swiping Record: | 100,000 Cards and 300,000 Swiping Card Records | |
Processor: | ≥1GHz, 32 Bit High-performance Processor |
Device Interfaces | ||
---|---|---|
Communication Mode: | TCP/IP, Wi-Fi, RS-485, and Wigand 26/34 (under the card reader mode only) | |
Accessible Card Reader: | Card Reader | |
Output Interface: | Lock Relay × 1, Alarm Relay × 1 | |
Transmission Rate: | TCP/IP, WIFI: 10/100Mbps Self-adaptive,
RS-485: 19200 bps-N-8-1 |
|
Input Interface: | Tamper Alarm × 1, Exit Button × 1, Door Sensor × 1, Alarm Input × 2 |
General | ||
---|---|---|
Audio: | Loudspeaker | |
Key Board: | Keyboard (Back light) | |
LCD Screen: | 320×240 LCD-TFT Display Screen | |
Working Current: | 500mA ( without Locks) | |
Power Supply: | 12VDC | |
LED Indicator: | Power/Status | |
Certification: | CE, FCC | |
Working Temperature : | -20°C to +65°C (-4°F to +149°F) | |
Working Humidity: | 10% to 90% (Non-Condensing) | |
Dimensions (L×W×H): | 122mm × 82mm × 23mm (4.8” × 3.2” × 0.9″) | |
Weight: | 280g (9.88lb) |
Be the first to review “Standalone Access Control Terminal” Cancel reply
Reviews
There are no reviews yet.